Surface Mount Intermediate Fixing

Use as an intermediate fixing on light-duty netting installations.

1 per metre on 50mm and 75mm nets.

1 per 0.5m on 40mm and 28mm nets.

1 per 0.3m on 19mm nets.

Reduce spacings and increase number of fixings on heavy duty installations.

1. Ensure area to be adhered to is dry and has been thoroughly cleaned, degreased and etched if necessary using Surface Activator do not touch area being adhered to once prepared.

2. Treat underside of surface mount base with Surface Activator prior to bonding

3. Apply a reasonable amount of Fix All to the underside of the Surface Mount Fixings and mate immediately to the substrate pressing down firmly until rivets of glue form through the two holes (do not wipe these away).

4. Leave to fully cure for at least 24 hours prior to loading.